Hubbardton-forge 203030 Bedienungsanleitung PDF herunterladen (Seite 2)

Installation Instructions B210

Flora Sconce 20-3030 Page 2 of 3

Hand-Forged, Vermont-Made Lighting and Accessories

154 Route 30 South, Castleton, Vermont 05735

24581RevA

To Mount Fixture to Wall with Standard 4" Box (Figure 2)

Component Parts

A Crossbar

B Nipple

C Threaded Cap

D Fixture Assembly

E Ground Screw

F Lock Nut

G Wall Plate

H Cupped Washer

I Ground Screw

Caution: Be sure power is off at the main breaker

box prior to installation.

1. Carefully unpack the fixture from the carton.

2. Using two machine screws (not provided),

fasten the crossbar (A) to the electric box

making sure crossbar is level.

Note: A new electric box comes with screws.

When replacing a fixture, retain the existing

screws for use with the new fixture

3. Thread the nipple (B) into the crossbar (A).

Adjust the nipple to proper length to ensure

the fixture will fit snugly to the wall.

4. Ground the crossbar (A) by securing a pigtail

lead around ground screw (E).

5. Orient the wall plate (G) so that the bent tab is

at the top and bent away from the wall and slip onto

nipple (B). The tab will fit into the back of the

fixture to facilitate alignment.

6. Run a pigtail lead using ground screw (I) and cupped washer (H).

7. Thread the pigtail lead and fixture wires through the large diameter hole at the bottom of the wall plate (G).

8. Hold the fixture assembly (D) close to the wall and using suitable wire connectors, not provided, connect fixture

wires and pigtail leads to supply wires (white to white or ribbed, black to black or smooth and green to green or

bare).

Caution: Make sure wire connectors are twisted on securely, and no bare wire is exposed.

9. Secure nipple (B) and wall plate (G) with lock nut (F).

10. Place fixture firmly against the wall and fasten with threaded cap (C).

11. See instructions following to install glass.

(continued)

(Figure 2)

1 2 3

24581RevA 1
24581RevA 3

Kommentare zu diesen Handbüchern

Keine Kommentare

Hubbardton-forge 203030 Bedienungsanleitung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Hubbardton-forge 203030