Hubbardton-forge 204529 Bedienungsanleitung PDF herunterladen

Installation Instructions B229

For Sweeping Taper 20-4529E & 20-4529F Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

26785

Caution: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all applications. If

installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

To Mount Fixture to Wall (Figure 2)

Component Parts

A Crossbar

B Nipple

C Threaded Cap

D Fixture Assembly

E Ground Screw

F Lock Nut

G Wall Plate

Caution: Be sure power is off at the main

breaker box prior to installation.

1. Carefully unpack the fixture from the

carton.

2. Using two machine screws (not provided),

fasten the crossbar (A) to the electric box

making sure crossbar is level.

Note: A

new electric box comes with screws. When

replacing a fixture, retain the existing

screws for use with the new fixture

3. Thread the nipple (B) into the crossbar (A).

Adjust the nipple to proper length to ensure

the fixture will fit snugly to the wall.

4. Orient the wall plate (G) so that the bent tab

is at the top and bent away from the wall

and slip onto nipple (B). The tab will fit

into the back of the fixture to facilitate

alignment.

5. Hold the fixture assembly (D) close to the wall

and using suitable wire connectors, not provided,

connect fixture wires to supply (white to white or ribbed and black to black or smooth). Run a pigtail lead from

crossbar ground screw (E) to the junction box and connect all ground wires (bare copper or green to bare copper

or green). Caution:

Make sure wire connectors are twisted on securely, and no bare wire is exposed.

6. Thread the wires through the large diameter hole at the bottom of the wall plate (G).

7. Secure nipple (B) and wall plate (G) with lock nut (F).

8. Place fixture firmly against the wall and fasten with threaded cap (C).

9. See instructions following to install glass.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

1 2

B229 1
26785 1

Inhaltsverzeichnis

Seite 1 - 26785

Installation Instructions B229 For Sweeping Taper 20-4529E & 20-4529F Page 1 of 2 Hand-Forged, Vermont-Made Lighting and Accessories P.O. B

Seite 2

Installation Instructions B229 For Sweeping Taper 20-4529E & 20-4529F Page 2 of 2 Hand-Forged, Vermont-Made Lighting and Accessories P.O. B

Kommentare zu diesen Handbüchern

Keine Kommentare

Hubbardton-forge 204529 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Hubbardton-forge 204529 herunter. Hubbardton Forge 204529 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Hubbardton-forge 204529