Hubbardton-forge 204526 Bedienungsanleitung PDF herunterladen

Installation Instructions B237

Sweeping Taper Sconce 20-4526 Page 1 of 3

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

26943

Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all

applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

After installation extra hardware and accessories are possible; our kits are used on multiple products and options.

To Mount Fixture to Wall with Single Box (Figure 1)

Component Parts

A Crossbar

B Ground Screw

C Nipple

D Lock Nut

E Threaded Cap

F Fixture Assembly

Caution: Be sure power is off at the main breaker box

prior to installation.

1. Carefully unpack the fixture from the carton.

2. Using two machine screws (not provided), fasten the

crossbar (A) to the electric box making sure crossbar

is level.

Note: A new electric box comes with screws. When

replacing a fixture, retain the existing screws for use

with the new fixture

3. Thread the nipple (C) into the crossbar (A) and secure

with lock nut (D). Adjust the nipple to proper length

to ensure the fixture will fit snugly to the wall.

4. Ground the crossbar (A) by securing a pigtail lead

around ground screw (B).

5. Hold the fixture assembly (F) close to the wall and

using suitable wire connectors, not provided, connect

fixture wires and pigtail leads to supply wires (white

to white or ribbed, black to black or smooth and green

to green or bare).

Caution: Make sure wire connectors are twisted on

securely, and no bare wire is exposed.

6. Carefully tuck all wires behind the fixture, place

fixture firmly against the wall and fasten with

threaded cap (E).

7. See instructions following to install wall plate.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

1 2 3

26943 1

Inhaltsverzeichnis

Seite 1 - 26943

Installation Instructions B237 Sweeping Taper Sconce 20-4526 Page 1 of 3 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827, 154 Ro

Seite 2

Installation Instructions B237 Sweeping Taper Sconce 20-4526 Page 2 of 3 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827, 154 Ro

Seite 3

Installation Instructions B237 Sweeping Taper Sconce 20-4526 Page 3 of 3 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827, 154 Ro

Kommentare zu diesen Handbüchern

Keine Kommentare

Hubbardton-forge 204526 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Hubbardton-forge 204526 herunter. Hubbardton Forge 204526 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Hubbardton-forge 204526