Hubbardton-forge 204050 Bedienungsanleitung PDF herunterladen

Installation Instructions B147

For Berceau Sconce 20-4050 Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

21273

For fixtures requiring assembly, please refer to assembly instructions before installation.

Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all

applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

To Mount Fixture to Wall (Figure 1)

Component Parts

A Crossbar

B Threaded Stud (2)

C Barrel Knob (2)

D Fixture Assembly

E Ground Screw

Caution: Be sure power is off at the main breaker box

prior to installation.

1. Carefully unpack the fixture from the carton.

2. Using two machine screws (not provided), fasten

the crossbar (A) to the electric box making sure that

fixture mounting holes are level.

Note: A new electric box comes with screws.

When replacing a fixture, retain the existing screws

for use with the new fixture.

3. Thread studs (B) into the appropriate holes in the

crossbar (A). Adjust the studs to proper length to

ensure the fixture will fit snugly to the wall.

4. Hold the fixture assembly (D) close to the wall and using suitable wire connectors, not provided, connect fixture

wires to supply (white to white or ribbed and black to black or smooth). Connect all ground wires to ground

screw.

Caution: Make sure wire connectors are twisted on securely, and no bare wire is exposed.

5. Slide fixture assembly (D) over threaded studs (B) and push firmly to wall, making sure that no wires are pinched

between fixture back and wall. Fasten with barrel knobs (C). Be sure threaded studs (B) are fully seated in the

barrel knobs (C).

6. See instructions on next page to install glass.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

1 2

B147 2
21273 2

Inhaltsverzeichnis

Seite 1

Installation Instructions B147 For Berceau Sconce 20-4050 Page 1 of 2 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827, 154 Route

Seite 2 - 21273

Installation Instructions B147 For Berceau Sconce 20-4050 Page 2 of 2 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827, 154 Route

Kommentare zu diesen Handbüchern

Keine Kommentare

Hubbardton-forge 204050 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Hubbardton-forge 204050 herunter. Hubbardton Forge 204050 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Hubbardton-forge 204050