Hubbardton-forge 137710 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Hubbardton-forge 137710 herunter. Hubbardton Forge 137710 User Manual [en] Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 4
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Assembly & Installation Instructions A126
For Steppe Pendant 13-7710 Page 1 of 4
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735
19910 Rev A
CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL
INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.
This product must be installed in accordance with applicable installation code(s), by a person familiar with the
construction and operation of the product and the hazards involved.*
Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.
To Attach Fixture Pipes (Figure 1)
Component Parts
A Fixture Pipe
B Fixture Coupling
1. Carefully unpack the fixture from the carton.
2. Carefully thread fixture pipe (A), threaded end first, over
fixture wires.
3. Apply a drop of the supplied thread locking compound to
the internal threads at the top of the fixture (B) and screw
stem into fixture, being careful not to twist the wires.
Note: Application of the thread locking compound is
necessary to prevent the stem from loosening during
regular maintenance and cleaning of the fixture. Be certain
to apply the compound.
4. See instructions below to complete the installation.
(Figure 1)
To Assemble Canopy Pipes to Ceiling Bracket
(Figure 2)
Component Parts
C Hex Nipple (2)
D Lock Washer (2)
E Ceiling Bracket
F Canopy Pipes (2)
1. Insert threaded end of hex nipple (C) down through lock washer (D), ceiling
bracket (E) and into swivel at the end of canopy pipe (F).
2. Tighten securely being sure the notches in the swivels are aligned.
Note: If installing on a sloped ceiling, make certain that the notches in the swivel
portion of the stems are oriented toward the lower side of the slope.
(
Fi
g
ure
2
)
(continued)
Seitenansicht 0
1 2 3 4

Inhaltsverzeichnis

Seite 1 - 19910 Rev A

Assembly & Installation Instructions A126 For Steppe Pendant 13-7710 Page 1 of 4 Hand-Forged, Vermont-Made Lighting and Accessories P.O. B

Seite 2

Assembly & Installation Instructions A126 For Steppe Pendant 13-7710 Page 2 of 4 Hand-Forged, Vermont-Made Lighting and Accessories P.O. B

Seite 3

Assembly & Installation Instructions A126 For Steppe Pendant Fixture 13-7710 Page 3 of 4 Hand-Forged, Vermont-Made Lighting and Accessories

Seite 4 - 19910 Rev A

Assembly & Installation Instructions A126 For Steppe Pendant Fixture 13-7710 Page 4 of 4 Hand-Forged, Vermont-Made Lighting and Accessories

Kommentare zu diesen Handbüchern

Keine Kommentare