Hubbardton-forge 139600 Bedienungsanleitung PDF herunterladen

HUBBARDTONFORGE.COM

-, -   

154 RT. 30 SOUTH

•

CASTLETON, VERMONT 05735

19406 Rev B

Installation Instructions

If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you purchased this product.

We hope you enjoy your xture!

* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this xture.

To Assemble Fixture (Please see Figure 1 and illustrations on Page 3)

Component Parts

A Shade

B Retaining screws

C Spider assembly

D Support arms

E Socket assembly

F Diffuser

G Threaded Coupling

H Fixture pipe

I Clutch

J Clutch sleeve

K Canopy pipe

L Barrel knobs

M Canopy

N Threaded studs

O Crossbar

CAUTION: BE SURE POWER IS OFF AT THE MAIN BREAKER BOX PRIOR

TO INSTALLATION.

1. Carefully unpack the xture from the carton.

2. Thread the wires from the xture pipe (H) into and through

the canopy pipe (K) and up through the canopy (M). Unscrew

the clutch (I) from the canopy pipe (K); slide it across the wires

and onto the xture pipe (H). Follow this with the clutch sleeve

(J), so that the clutch sleeve nests in the clutch.

Important: To ensure full connection strength, make sure the tapered

end of the plastic clutch sleeve is oriented toward the clutch (Figure

1).

Slide the smaller pipe as far as necessary to give you the total length

of the xture which you desire. Be careful not to scratch the pipe

surfaces and to pull excess wire up through the canopy. There must

be a minimum 1-1/2" of inner pipe inside the outer pipe. Hand-tight

en the clutch to temporarily hold this adjustment. At this

point the adjustment is not securely fastened; do not depend on it to

permanently hold the xture.

A94

For Exos Shade Pendant 139600 & 139600F

Page 1 of 3

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND

PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with

applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on xture. Use only recommended bulbs with xture.

(Figure 1)

(Continued)



CLUTCH

TAPPERED END

OF PLASTIC SLEEVE

1 2 3

Installation Instructions 1

Inhaltsverzeichnis

Seite 1 - Installation Instructions

Seite 2

If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you purchased this product. We hope you en

Seite 3

Kommentare zu diesen Handbüchern

Keine Kommentare

Hubbardton-forge 139600 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Hubbardton-forge 139600 herunter. Hubbardton Forge 139600 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Hubbardton-forge 139600