Hubbardton-forge 139605 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Hubbardton-forge 139605 herunter. Hubbardton Forge 139605 User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 1
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Assembly Instructions A64
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont
17697 Rev B
For Adjustable Pendant Model 13-9605
Component Parts
A Thumb Screw (2)
B Upper Spider
C Arm
D Lower Spider
E Large Shade
F Large Spider
G Vertical Uprights
H Center Assembly
To Assemble
1. Carefully unpack the fixture from the carton.
2. Remove thumb screws (A) from lower spider (D) and set aside. The
thumb screws are attached this way for shipping purposes only.
3. Assemble large spider (F) by placing upper spider (B) on lower
spider (D) with arm (C) between them. Make sure arm (C) is oriented
the same as the other two arms. Slot in both assemblies should be
aligned.
4. Install (2) thumb screws (A) and tighten.
5. Install and assemble center assembly (G) per Installation and
Assembly Instructions A94.
6. Slide large shade (E) up pipe past center assembly (H).
7. Hold large shade above center assembly (H) and align large spider
(F) so square openings line up with vertical uprights (G) on center
assembly.
8. Lower large spider (F) onto vertical uprights until it is resting on
the center assembly (H).
9. Lower large shade (E) until it rests in the brackets of the large
spider (F).
If you need further assistance, or find that you are missing any parts,
please contact the dealer from which you purchased this product.
We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by
improper installation, lamping or use of this fixture.
CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL
INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.
This product must be installed in accordance with applicable installation code(s), by a person familiar with the
construction and operation of the product and the hazards involved.*
Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.
Seitenansicht 0
1

Inhaltsverzeichnis

Seite 1 - Assembly Instructions A64

Assembly Instructions A64 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827, 154 Route 30 South, Castleton, Vermont 17697 Rev B F

Kommentare zu diesen Handbüchern

Keine Kommentare