Hubbardton-forge 204350 Bedienungsanleitung PDF herunterladen

Installation Instructions B288

Hobie Sconce 20-4350 Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

154 Route 30 South, Castleton, Vermont 05735

28113

Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all

applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

To Mount Fixture to Wall (Figure 1)

Component Parts

A Fixture Assembly

B Wall Mounting Bracket

C #8 Black Screws (4)

D Green Ground Screw

E Cupped Washer

Caution: Be sure power is off at the main breaker box prior to installation.

1. Carefully unpack the fixture from the carton.

2. Using two machine screws (not provided),

fasten the wall mounting bracket (B) to the

electric box making sure that fixture

mounting holes are level.

Note: A new electric box comes with screws.

When replacing a fixture, retain the existing

screws for use with the new fixture.

3. Thread the wires in the electrical box through

the center hole in the wall mount bracket.

4. Hold the fixture assembly (A) close to the

wall mount bracket (B) and, using suitable

wire connectors (not provided), connect

fixture wires to supply wires (white to white

or ribbed and black to black or smooth). Run

a pigtail lead from the green ground screw

(D) and cupped washer (E) and connect all

ground wires (bare copper or green to bare

copper or green).

Caution: Make sure wire connectors are

twisted on securely, and no bare wires are

exposed.

5. Carefully tuck all wires behind the fixture

assembly and inside the wall mount bracket and

place the fixture firmly onto mounting bracket (B)

and fasten with (2) #8 black screws on top (C).

6. To complete attachment of fixture, install remaining black screws (C) in bottom of fixture.

7. Complete steps below to install bulb and glass.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

1 2

B288 1
28113 1

Inhaltsverzeichnis

Seite 1 - 28113

Installation Instructions B288 Hobie Sconce 20-4350 Page 1 of 2 Hand-Forged, Vermont-Made Lighting and Accessories 154 Route 30 South, Castl

Seite 2

Installation Instructions B288 Hobie Sconce 20-4350 Page 2 of 2 Hand-Forged, Vermont-Made Lighting and Accessories 154 Route 30 South, Castl

Kommentare zu diesen Handbüchern

Keine Kommentare

Hubbardton-forge 204350 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Hubbardton-forge 204350 herunter. Hubbardton Forge 204350 User Manual [en] Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Hubbardton-forge 204350