Hubbardton-forge 204507 Bedienungsanleitung PDF herunterladen

Installation Instructions B245

Tapered Pierced with Shade 20-4507 Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

154 Route 30 South, Castleton, Vermont 05735

26951

Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all

applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

To Mount Fixture to Wall (Figure 1)

Component Parts

A Crossbar

B Threaded Stud (2)

C Knurled Balls (2)

D Fixture Assembly

E Ground Screw

Caution: Be sure power is off at the main

breaker box prior to installation.

1. Carefully unpack the fixture from the

carton.

2. Using two machine screws (not

provided), fasten the crossbar (A) to

the electric box making sure that

fixture mounting holes are level.

Note: A new electric box comes with

screws. When replacing a fixture,

retain the existing screws for use with

the new fixture.

3. Thread studs (B) into the appropriate

holes in the crossbar (A). Adjust the

studs to proper length to ensure the

fixture will fit snugly to the wall.

4. Hold the fixture assembly (D) close to

the wall and using suitable wire

connectors (not provided) connect fixture wires to supply (white to white or ribbed and black to black or smooth).

Run a pigtail lead from crossbar ground screw (E) to the junction box and connect all ground wires (bare copper

or green to bare copper or green).

Caution: Make sure wire connectors are twisted on securely, and no bare wire is exposed.

5. Slide fixture assembly (D) over threaded studs (B) and push firmly to wall, making sure that no wires are pinched

between fixture back and wall. Fasten with knurled balls (C). Be sure threaded studs (B) are fully seated in the

knurled balls (C).

6. See instructions on next page to install shade.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

1 2

B245 1
26951 1

Inhaltsverzeichnis

Seite 1 - 26951

Installation Instructions B245 Tapered Pierced with Shade 20-4507 Page 1 of 2 Hand-Forged, Vermont-Made Lighting and Accessories 154 Route 30 So

Seite 2

Installation Instructions B245 Tapered Pierced with Shade 20-4507 Page 2 of 2 Hand-Forged, Vermont-Made Lighting and Accessories 154 Route 30 So

Kommentare zu diesen Handbüchern

Keine Kommentare

Hubbardton-forge 204507 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Hubbardton-forge 204507 herunter. Hubbardton Forge 204507 User Manual [en] Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Hubbardton-forge 204507