Hubbardton-forge 101281 Bedienungsanleitung PDF herunterladen

Installation Instructions A156

For Berceau Chandelier 10-1280 10-1281 Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

21220 Rev. A

To Install the Canopy (Figure 1)

Component Parts

A Ground Screw

B Crossbar

C Lock Nut

D Nipple

E Canopy

F Loop Collar

G Canopy Loop

H Fixture Loop

Caution: Be sure power is off at the main breaker box prior to installation

1. Carefully unpack the fixture from the carton.

2. Using two machine screws (not provided), fasten the crossbar (B) to

the electric box (see illustration).

Note: A new electric box comes with screws. When replacing a

fixture, retain the existing screws for use with the new fixture.

4. Thread the nipple (D) into the crossbar (B) and secure with lock nut

(C); slide canopy (E) over nipple (D), and attach the canopy loop (E) to

the nipple (D). Adjust the nipple to proper length to ensure a snug

canopy fit before proceeding.

5. Attach one end of the chain to the fixture loop (H). Lace the wire

through every other link of the chain to the end. Slip wires and chain

through the collars and canopy (G, F & E). Fasten the chain to the

canopy loop (G), then slip wires through the loop and nipple, into the

electric box. Make sure to provide enough slack in the wire to ensure

weight of fixture is supported by the chain.

6. Using suitable wire connectors (not provided) connect fixture wires to

supply wires (white to ribbed side of the fixture s cord, black to smooth

side). Connect all ground wires to crossbar ground screw (A).

Caution: Make sure wire connectors are twisted on securely, and no

bare wire is exposed.

7. Raise canopy (E) to the ceiling and secure loop collar (F) to canopy

loop (G).

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

This illustration represents a typical fixture

and may not match every style.

1 2

A156 1
21220 Rev. A 1

Inhaltsverzeichnis

Seite 1 - 21220 Rev. A

Installation Instructions A156 For Berceau Chandelier 10-1280 10-1281 Page 1 of 2 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box

Seite 2

Installation Instructions A156 For Berceau Chandelier 10-1280 10-1281 Page 2 of 2 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box

Kommentare zu diesen Handbüchern

Keine Kommentare

Hubbardton-forge 101281 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Hubbardton-forge 101281 herunter. Hubbardton Forge 101281 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Hubbardton-forge 101281