Hubbardton-forge 103043 Bedienungsanleitung PDF herunterladen

Installation Instructions A306

Flora Chandelier 10-3043 Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

154 Route 30 South, Castleton, Vermont 05735

27185

To Install the Canopy (Figure 1)

Component Parts

A Ground Screw

B Crossbar

C Lock Nut

D Nipple

E Canopy

F Loop Collar

G Canopy Loop

H Fixture Loop

I Chain

Caution: Be sure power is off at the main breaker box prior to

installation

1. Carefully unpack the fixture from the carton.

2. Using two machine screws (not provided), fasten the crossbar (B)

to the electric box (see illustration).

Note: A new electric box comes with screws. When replacing a

fixture, retain the existing screws for use with the new fixture.

3. Thread the nipple (D) into the crossbar (B) and secure with lock

nut (C); slide canopy (E) over nipple (D), and attach the canopy

loop (G) to the nipple (D). Adjust the nipple to proper length to

ensure a snug canopy fit before proceeding.

4. Attach one end of the chain (I) to the fixture loop (H). Lace the

wire through every other link of the chain (I) to the end. Slip wires

and chain (I) through the collars and canopy (G, F & E). Fasten the

chain (I) to the canopy loop (G), and then slip wires through the

loop and nipple, into the electric box. Make sure to provide

enough slack in the wire to ensure weight of fixture is supported

by the chain (I).

5. Using suitable wire connectors (not provided) connect fixture

wires to supply wires (white to ribbed side of the fixture cord,

black to smooth side). Run a pigtail lead from crossbar ground

screw (A) to the junction box and connect all ground wires (bare

copper or green to bare copper or green).

Caution: Make sure wire connectors are twisted on securely, and

no bare wire is exposed.

6. Raise canopy (E) to the ceiling and secure loop collar (F) to

canopy loop (G).

7. Follow instructions on next page to install glass.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

1 2

A306 1
27185 1

Inhaltsverzeichnis

Seite 1 - 27185

Installation Instructions A306 Flora Chandelier 10-3043 Page 1 of 2 Hand-Forged, Vermont-Made Lighting and Accessories 154 Route 30 South, Cas

Seite 2

Installation Instructions A306 Flora Chandelier 10-3043 Page 2 of 2 Hand-Forged, Vermont-Made Lighting and Accessories 154 Route 30 South, Cas

Kommentare zu diesen Handbüchern

Keine Kommentare

Hubbardton-forge 103043 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Hubbardton-forge 103043 herunter. Hubbardton Forge 103043 User Manual [en] Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Hubbardton-forge 103043