Hubbardton-forge 217651 Bedienungsanleitung PDF herunterladen

Installation Instructions B134

For Gallery Sconce 21-7651F Page 1 of 3

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

21144

For fixtures requiring assembly, please refer to assembly instructions before installation.

Please Note: This fixture is designed to be mounted on a standard wall surface and may not be

suitable for all applications. If installing in a non-wood frame application, we recommend

consulting a qualified builder or electrician.

To Prepare to Install (Figure 1)

Component Parts

A Fixture

B Screws (4)

Caution: Be sure power is off at the main breaker box prior to installation.

1. Carefully unpack the fixture from the carton.

2. Remove four screws (B) from front of fixture to release wall mounting bracket and

discard screws.

To Install Wall Mounting Bracket

(Figure 2)

Component Parts

C Wall Mounting Bracket

D Anchors (6)

E #10 Screws (6)

Place the wall mounting bracket (C) over the electrical box using the center hole

provided being sure to hold it plum and level. With a pencil, mark the location of all

mounting holes in the wall mount bracket on the wall behind.

IMPORTANT: Wall mounting bracket must be secured to a solid framing member in

at least four locations. Do not depend on drywall anchors alone to support this

fixture. If in doubt, contact a qualified electrician.

Set aside the wall mounting bracket and drill 1/4" holes in the locations marked on

the wall. For holes using anchors, place the tapered end of the anchors (D) into the

holes and gently tap them flush to the wall using a light weight hammer.

2. Thread the wires in the electrical box through the hole in the wall mounting bracket

bracket securely to the wall. Be careful not to over-tighten or strip the anchors.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum watta

e noted on fixture. Use onl

recommended bulbs with fixture.

(Figure 1)

(Figure 2)

1 2 3

B134 1
21144 1
21124 2

Inhaltsverzeichnis

Seite 1 - 21144

Installation Instructions B134 For Gallery Sconce 21-7651F Page 1 of 3 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827, 154 Ro

Seite 2 - 21124

Installation Instructions B134 For Gallery Sconce 21-7651F Page 2 of 3 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827, 154 Ro

Seite 3

Installation Instructions B134 For Gallery Sconce 21-7651F Page 3 of 3 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827, 154 Ro

Kommentare zu diesen Handbüchern

Keine Kommentare

Hubbardton-forge 217651 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Hubbardton-forge 217651 herunter. Hubbardton Forge 217651 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Hubbardton-forge 217651