Hubbardton-forge 217730 Bedienungsanleitung PDF herunterladen

Installation & Assembly Instructions B108

Ono Sconce 21-7730F Page 1of 2

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

19750 Rev B

Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all

applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

To Install (Figure 1)

Component Parts

A Fixture

B Mounting Plate

C Ground Screw

D Screws (2)

E Cupped Washer

F Anchors (4)

G #10 Screws (4)

Caution: Be sure power is off at the main breaker box prior to

installation.

1. Carefully unpack the fixture from the carton.

2. Place the wall mounting plate (B) over the electrical box

using the center hole provided being sure to hold it plum

and level. With a pencil, mark the location of all

mounting holes in the wall mount bracket on the wall

behind. Set aside the wall mounting plate and drill 1/4"

holes in the locations marked on the wall. For holes using

anchors, place the tapered end of the anchors (F) into the

holes and gently tap them flush to the wall using a light

weight hammer. Using two machine screws (not

provided), fasten the mounting plate (B) to the outlet box,

making sure the mounting holes are level.

Note: A new outlet box comes with screws. When

replacing a fixture, retain the screws for use with the new

fixture.

IMPORTANT: Fixture must be secured to a solidly

mounted electrical box. If in doubt, contact a qualified

electrician.

3. Move fixture (A) into position. Using suitable wire connectors (not provided), connect the fixture wires to the

supply wires; white to white, black to black, and bare copper or green to bare copper or green. Connect all ground

wires to mounting plate (B) using cupped washer (E) and ground screw (C).

Caution: Make sure wire connectors are twisted on securely and no bare wires are exposed.

4. Place fixture firmly against wall and fasten with two screws (D).

5. Install light bulb provided. (13 watt T2 fluorescent)

6. Restore electricity at main breaker.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

1 2

19750 Rev B 1

Inhaltsverzeichnis

Seite 1 - 19750 Rev B

Installation & Assembly Instructions B108 Ono Sconce 21-7730F Page 1of 2 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827, 15

Seite 2

Installation & Assembly Instructions B108 Ono Sconce 21-7730F Page 2of 2 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827, 15

Kommentare zu diesen Handbüchern

Keine Kommentare

Hubbardton-forge 217730 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Hubbardton-forge 217730 herunter. Hubbardton Forge 217730 User Manual [en] Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Hubbardton-forge 217730