Hubbardton-forge 137530F Bedienungsanleitung PDF herunterladen

Assembly & Installation Instructions A179

For Ellipse Circular Adjustable Pendant 13-7530F Page 1 of 4

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

21365

Stem Assembly (Figure 1)

Component Parts

A Fixture Pipe (3)

B Fixture Coupling (3)

1. Carefully unpack the fixture from the carton.

2. Carefully thread fixture pipe (A), threaded end first, over fixture

wires.

3. Apply a drop of the supplied thread locking compound to the

internal threads of fixture coupling (B) and screw stem into fixture,

being careful not to twist or pinch the wires.

Note: Application of the thread locking compound is necessary to

prevent the stem from loosening during regular maintenance and

cleaning of the fixture. Be certain to apply the compound.

4. See instructions below to complete the installation.

Assemble the Canopy Pipes

(Figure 2)

Component Parts

C Cable Gripper

D Hex Nipple (2)

E Flat Washer (3)

F Lock Washer (5)

G Support Ring

H Canopy Pipe

1. Apply a drop of the supplied thread locking compound to the external threads of

hex nipple (D). Slip flat washer (E) and two lock washers (F) over hex nipple

(D). Slip hex nipple (D) through support ring (G) and thread into canopy pipe

(H). Repeat with other hex nipple (D).

Note: Application of the thread locking compound is necessary to prevent the

stem from loosening during regular maintenance and cleaning of the fixture. Be

certain to apply the compound.

2. Slip flat washer (E) and lock washer (F) over cable gripper (C). Slip cable gripper

Do not apply

thread lock to cable gripper at this point.

(continued)

(Figure 1)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 2)

1 2 3 4

A179 1
21365 1

Inhaltsverzeichnis

Seite 1 - 21365

Assembly & Installation Instructions A179 For Ellipse Circular Adjustable Pendant 13-7530F Page 1 of 4 Hand-Forged, Vermont-Made Lighting

Seite 2

Assembly & Installation Instructions A179 For Ellipse Circular Adjustable Pendant 13-7530F Page 2 of 4 Hand-Forged, Vermont-Made Lighting

Seite 3

Assembly & Installation Instructions A179 For Ellipse Circular Adjustable Pendant 13-7530F Page 3 of 4 Hand-Forged, Vermont-Made Lighting

Seite 4

Assembly & Installation Instructions A179 For Ellipse Circular Adjustable Pendant 13-7530F Page 4 of 4 Hand-Forged, Vermont-Made Lighting

Kommentare zu diesen Handbüchern

Keine Kommentare

Hubbardton-forge 137530F Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Hubbardton-forge 137530F herunter. Hubbardton Forge 137530F User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Hubbardton-forge 137530F