Hubbardton-forge 126754 Bedienungsanleitung PDF herunterladen

Installation Instructions A49

For Semi Flush Pendants with Twist Locking Mechanism Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 15636 Rev A

For fixtures requiring assembly, please refer to assembly instructions prior to installation.

To Install

(Figure 1)

Component Parts

A Canopy

B Electric Box Machine Screws (not provided)

C Black or Smooth Wires

D Ground Wires

E White or Ribbed Wires

F Round Cross Bar

G 8-32 Threaded Studs

H 8-32 Knurled Balls

I Wire Nuts or connectors (not provided)

J Green Ground Screw

Caution: Be sure power is off at the main breaker box prior to installation

1. Carefully unpack the fixture from the carton.

2. Thread studs (G) through appropriate holes in cross bar (F) to match

hole centers in canopy (A). Move ground screw (J) to another

available threaded hole if necessary.

3. Using two machine screws (B, not provided) fasten cross bar to the

electric box using outer oval holes to orient fixture to desired

hanging position.

Note: A new electric box comes with screws. When replacing an

existing fixture, retain the screws for use with the new fixture.

4. Using suitable wire connectors (I) (not provided), connect fixture

wires to supply wires (white to white or ribbed (E) and black to

black or smooth (C). Connect all ground wires (D) to green ground

screw (J).

Caution: Make sure wire connectors are twisted on securely, and no

bare wire is exposed.

5. Slide fixture canopy (A) over threaded studs and push firmly to

ceiling, making sure that no wires are pinched between fixture

canopy and ceiling. Fasten with knurled balls (H). Be sure studs (G)

are fully seated in the knurled balls (H).

6. Install light bulb(s) (not provided).

7. Install glass (refer to glass installation instructions if appropriate).

8. Restore electricity at main breaker.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum watta

e noted on fixture. Use onl

recommended bulbs with fixture.

Figure 1

1 2

15636 Rev A 1

Inhaltsverzeichnis

Seite 1 - 15636 Rev A

Installation Instructions A49 For Semi Flush Pendants with Twist Locking Mechanism Page 1 of 2 Hand-Forged, Vermont-Made Lighting and Accessories

Seite 2

Installation Instructions A49 For Semi Flush Pendants with Twist Locking Mechanism Page 2 of 2 Hand-Forged, Vermont-Made Lighting and Accessories

Kommentare zu diesen Handbüchern

Keine Kommentare

Hubbardton-forge 126754 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Hubbardton-forge 126754 herunter. Hubbardton Forge 126754 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Hubbardton-forge 126754