Hubbardton-forge 205963 Bedienungsanleitung PDF herunterladen

HUBBARDTONFORGE.COM

-, -   

154 RT. 30 SOUTH

•

CASTLETON, VERMONT 05735

30470

Installation Instructions

If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you purchased this product.

We hope you enjoy your xture!

* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this xture.

Please Note: This fixture is designed to be mounted on a standard wall

surface and may not be suitable for all applications. If installing in a non-

wood frame application, we recommend consulting a qualified builder

or electrician.

To Mount Fixture to Wall (Figure 1)

Component Parts

A Crossbar

B Threaded Stud (2)

C Knurled Ball (2)

D Fixture Assembly

E Ground Screw

CAUTION: BE SURE POWER IS OFF AT THE MAIN BREAKER BOX

PRIOR TO INSTALLATION.

1. Carefully unpack the xture from the carton.

2. Using two machine screws (not provided), fasten the cross

bar (A) to the electric box making sure that xture mounting

holes are level.

Note: A new electric box comes with screws. When replacing a fixture,

retain the existing screws for use with the new fixture.

3. Thread studs (B) into the appropriate holes in the crossbar

(A). Adjust the studs to proper length to ensure the

xture will t snugly to the wall.

4. Hold the xture (D) close to the wall and using suitable

wire connectors, not provided, connect xture wires to

supply (white to white and black to black). Run a pigtail lead

from crossbar ground screw (E) to the junction box

and connect all ground wires (bare copper or green to bare

copper or green).

CAUTION: MAKE SURE WIRE CONNECTORS ARE TWISTED ON

SECURELY, AND NO BARE WIRE IS EXPOSED.

5. Slide xture assembly (D) over threaded studs (B) and push

rmly to wall, making sure that no wires are pinched

between xture back and wall. Fasten with knurled balls

(C). Be sure threaded studs (B) are fully seated in the knurled

balls (C).

B311

Cavo Sconce with Shade 205963

Page 1 of 2

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND

PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with

applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on xture. Use only recommended bulbs with xture.

(Figure 1)

(Continued)

1 2

Installation Instructions 1

Inhaltsverzeichnis

Seite 1 - Installation Instructions

Seite 2

If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you purchased this product. We hope you en

Kommentare zu diesen Handbüchern

Keine Kommentare

Hubbardton-forge 205963 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Hubbardton-forge 205963 herunter. Hubbardton Forge 205963 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Hubbardton-forge 205963