Hubbardton-forge 307110 Bedienungsanleitung PDF herunterladen

Installation Instructions B167

For Outdoor Sconces 30-7105, 30-7105F, 30-7110 & 30-7110F Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

22610

To Install Fixture

(Figures 1 & 2)

Component Parts

A Cross Bar

B Threaded Studs (2)

C Fixture

D Knurled Balls (2)

E Ground Screw

F Caulking Lip

G Top Hat

H Thumb Screws

Note: Fixture enclosure to be located four feet above

the ground.

Caution: Be sure power is off at the main breaker box

prior to installation.

1. Carefully unpack the fixture from the carton.

2. Remove top hat (G) from fixture (C) by removing

thumb screws (H). Set screw and top hat aside for

later use.

3. Using two machine screws (not provided) attach cross bar (A) to the electric

box using inside oval holes to orient fixture. Note: A new electric box comes

with screws. When replacing a fixture, retain the screws for use with the new

fixture.

4. Start threaded studs (B) into appropriate holes in crossbar (A).

5. Using suitable wire connectors (not provided), connect the fixture wires to the

supply wires, (white to white, black to black, bare copper or green to bare

copper or green). If the fixture is wired with twin lead lamp cord, connect the

ribbed side to white, and the smooth side to black. Caution: Make sure wire

connectors are twisted on securely and no bare wires are exposed.

6. Apply a generous bead of a suitable caulking material to caulking lip (F) on the

fixture. (See Figure 2)

7. Carefully tuck all wires behind the fixture. Place fixture (C) over threaded

studs (B). Fasten with knurled balls (D). Be sure threaded studs (B) are fully

seated in the knurl balls (D).

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

(Figure 2)

1 2

B167 1
22610 1

Inhaltsverzeichnis

Seite 1 - 22610

Installation Instructions B167 For Outdoor Sconces 30-7105, 30-7105F, 30-7110 & 30-7110F Page 1 of 2 Hand-Forged, Vermont-Made Lighting and

Seite 2

Installation Instructions B167 For Outdoor Sconces 30-7105, 30-7105F, 30-7110 & 30-7110F Page 2 of 2 Hand-Forged, Vermont-Made Lighting and

Verwandte Modelle: 307105

Kommentare zu diesen Handbüchern

Keine Kommentare

Hubbardton-forge 307110 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Hubbardton-forge 307110 herunter. Hubbardton Forge 307110 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: 307105

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Hubbardton-forge 307110