Hubbardton-forge 161120 Bedienungsanleitung PDF herunterladen

HUBBARDTONFORGE.COM

-, -   

154 RT. 30 SOUTH

•

CASTLETON, VERMONT 05735

30031 B

Installation Instructions

If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you purchased this product.

We hope you enjoy your xture!

* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this xture.

To Install the Canopy (Figures 1 & 2)

Component Parts

A Crossbar

B Ground Screw

C Cupped Washer

D Canopy

E #8 Screws

CAUTION: BE SURE POWER IS OFF AT THE MAIN BREAKER BOX

PRIOR TO INSTALLATION.

1. Carefully unpack the xture from the carton.

2. Crossbar (A) and canopy (D) ship attached. Remove (2) #8

screws (E) to separate the canopy (D) from the crossbar (A).

Retain parts for later use.

3. Using two machine screws (not provided), fasten the cross-

bar (A) to the electric box.

Note: A new electric box comes with screws. When replacing a

xture, retain the existing screws for use with the new xture.

4. Height of xture can be set before attaching the xture to

the ceiling. Remove screws w/lock washers (M) and canopy

plate (L) from canopy (D). If height is going to stay at max

length or just a slight height adjustment is needed it may not

be necessary to remove the canopy plate. Note: Fixture is

shipped at max height.

5. Push supply/support cable (H) into canopy gripper (G) until

desired height is reached.

6. Coil supply/support cable (H) in canopy (D) and place

canopy plate (L) in canopy (D). Install screws w/lock wash-

ers (M) to secure plate.

CAUTION: BE SURE NOT TO PINCH THE SUPPLY/SUPPORT CABLE IN

BETWEEN THE CANOPY (D) AND THE CANOPY PLATE (L).

7. Using suitable wire connectors (not provided) connect

xture wires to supply wires (white to white, black to black).

Using the crossbar ground screw (B) and the cupped

washer (C) run a pigtail lead to the junction box and connect

all ground wires (bare copper or green to bare copper or

green).

A346

Hood Pendant Vintage Platinum 161120

Page 1 of 2

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND

PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with

applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on xture. Use only recommended bulbs with xture.

(Figure 2)

(Continued)

(Figure 1)

F Fixture

G Canopy Gripper

H Supply/Support Cable

L Canopy Plate

M Screws w/ Lock Washers

1 2

Installation Instructions 1

Inhaltsverzeichnis

Seite 1 - Installation Instructions

Seite 2

If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you purchased this product. We hope you en

Kommentare zu diesen Handbüchern

Keine Kommentare

Hubbardton-forge 161120 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Hubbardton-forge 161120 herunter. Hubbardton Forge 161120 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Hubbardton-forge 161120