Hubbardton-forge 124550 Bedienungsanleitung PDF herunterladen

Installation Instructions A112

Compass Semi-Flush 12-4550 Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

154 Route 30 South, Castleton, Vermont 05735 19836 Rev A

To Install Fixture (Figure 1)

Component Parts

A Crossbar

B Ground Screw

C Threaded Stud (2)

D Fixture

E Knurl Ball (2)

Caution: Be sure power is off at the main breaker box prior to installation

1. Remove tab (H) from glass frame (J) by removing flat

head screw (F). Do not discard tab or flat head screw.

2. Carefully unpack the fixture from the carton.

3. Thread studs (C) through appropriate holes in cross bar

(A) to match hole centers in fixture (D). Move ground

screw (B) to another available threaded hole if necessary.

4. Using two machine screws (not provided) fasten cross bar

(A) to the electric box using outer oval holes to orient

fixture to desired hanging position.

Note: A new electric box comes with screws. When

replacing an existing fixture, retain the screws for use with

the new fixture.

5. Using suitable wire connectors (not provided), connect

fixture wires to supply wires (white to white or ribbed and

black to black or smooth. Connect all ground wires to

green ground screw (B).

Caution: Make sure wire connectors are twisted on

securely, and no bare wire is exposed.

6. Slide fixture (D) over threaded studs and push firmly to

ceiling, making sure that no wires are pinched between

fixture and ceiling. Fasten with knurl balls (E). Be sure

studs (C) are fully seated in the knurl balls (E).

7. Refer to instructions on next page to install glass & bulbs.

8. Restore electricity at main breaker.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

1 2

A112 1
19836 Rev A 2

Inhaltsverzeichnis

Seite 1 - A112

Installation Instructions A112 Compass Semi-Flush 12-4550 Page 1 of 2 Hand-Forged, Vermont-Made Lighting and Accessories 154 Route 30 South,

Seite 2 - 19836 Rev A

Installation Instructions A112 Compass Semi-Flush 12-4550 Page 2 of 2 Hand-Forged, Vermont-Made Lighting and Accessories 154 Route 30 South,

Kommentare zu diesen Handbüchern

Keine Kommentare

Hubbardton-forge 124550 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Hubbardton-forge 124550 herunter. Hubbardton Forge 124550 User Manual [en] Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Hubbardton-forge 124550